 In 1999, Kannegiesser presented an innovative centrifuge concept. For the first time, the drum unit was moved by an oscillating washing movement without lifting cylinder, permitting the centrifuging action itself to be performed in the optimum horizontal position. Based on this patented concept, the PowerSpin series was completely redesigned.
Now the advantages of the system are combined with the only logic drive solution, the direct drive. The result is a centrifuge opening up a new performance spectrum, and in its turbo version, reaching its full capacity with a washing cycle of only 120 seconds.
A brief review of the most important highlights:
- Innovative oscillating washing movement of the drum without lifting cylinder.
- Frequency controlled direct drive without Vee-belts.
- Turbo version cycle times from 110 seconds.
- Oscillating washing movement, also frequency controlled, via direct drive.
- Spinning capacity freely programmable up to 800g.
- Entirely new design of the inner drum with special perforation and a special surface finish.
- Each type of work, including terry material, is unloaded without auxiliary tools.
- Unloading without belt and without pusher.
- Intermittent centrifuging.
- Perfect hygiene by a stainless steel frame.
PowerSpin Series:
- PowerSpin PS 40 - up to a 40 kg load
- PowerSpin PS 65 – up to a 65 kg load
- PowerSpin PS 100 – up to a 100 kg load
Cycle Time: from 180 seconds (or from 110 seconds on Turbo versions) valid for all PS models.
|
